Seachem Pond PhosGuard 1L
Stock Locations
-
Richmond Nelson:5 in Stock
-
Annesbrook:Out of Stock
Description
Seachem Pond PhosGuard 1L
Pond PhosGuard™ is a non-herbicidal, environmentally sound approach to the problem of phosphate control in ponds. It is a filter adsorbent that removes phosphates, silicates, and organic nutrients. A 1 Litre size treats 400-1200L
Pond PhosGuard™ is spherical. Its shape allows for maximum water flow through the media. Granular phosphate removers can become compacted, dramatically limiting their capacity to remove phosphate. If the media can’t come into contact with the water, it can’t remove phosphate from it. Pond PhosGuard™ is the only spherical phosphate remover on the market.
Directions
Use Pond PhosGuard™ in the chemical module of your pond filter. If a chemical module is lacking, place in your pond filter so as to maximize the amount of water passing through it. The beads are sufficiently large that a filter bag should not be required for most filters. Check the specifications for your filter. Each litre of Pond PhosGuard™ will treat about 400-1200 for 1 to 3 months, depending on the biological load of the pond. It works better at alkaline or neutral pH. Avoid using phosphate based buffers or fertilizers that contain phosphate or nitrate. Caution: May generate heat on initial contact with water. Pre-wet by slowly adding to a double volume of water (e.g. pre-wet 1 L of product with 2 L of water)
